Brand: TP-Link | Category: Network Switches
SKU: SG2210P | Part #: SG2210P | MPN: SG2210P
Contact for Pricing — Request a Quote
The TP-Link Omada SG2210P is a managed Gigabit rack switch with 8 RJ-45 Gigabit Ethernet (10/100/1000) ports, all supporting PoE+, plus 2 SFP module slots. It has a total PoE budget of 61W, takes power through a DC-in jack, and does not support 10G.
Management features include VLAN support, link aggregation, spanning tree protocol, port mirroring, rate limiting, flow control and broadcast storm control, along with auto-negotiation and Auto MDI/MDI-X. Supported standards include IEEE 802.1Q, 802.1p, 802.1x, 802.1w, 802.1s, 802.3ad, 802.3af and 802.3z. The switch provides 4.1 MB of packet buffer memory, an 8000-entry MAC address table and 9000-byte jumbo frame support, and its firmware is upgradeable.
The SG2210P suits small office and branch networks that need managed switching and PoE+ power for devices such as access points, IP cameras or VoIP phones, with SFP slots for fibre uplinks.
Send the part number through our RFQ form and our team will reply within 48 hours.
| Brand | TP-Link |
| Category | Network Switches |
| SKU | SG2210P |
| Part Number | SG2210P |
| Condition | New |
| Power connector | DC-in jack |
| SFP module slots quantity | 2 |
| Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
| Basic switching RJ-45 Ethernet ports quantity | 8 |
| VLAN support | Yes |
| Flow control support | Yes |
| Link aggregation | Yes |
| Broadcast storm control | Yes |
| Rate limiting | Yes |
| Auto MDI/MDI-X | Yes |
| Spanning tree protocol | Yes |
| Auto-negotiation | Yes |
| Port mirroring | Yes |
| 10G support | No |
| Networking standards | IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3af, IEEE 802.3i, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z |
| Firmware upgradeable | Yes |
| Packet buffer memory | 4.1 MB |
| Jumbo frames | 9000 |
| Jumbo frames support | Yes |
| MAC address table | 8000 entries |
| Forwarding rate | 14.88 Mpps |
| Switching capacity | 20 Gbit/s |
| Power over Ethernet (PoE) | Yes |
| IPv4 & IPv6 features | Dual stack IPv4/IPv6 |
| Static port security | Yes |
| SSH/SSL support | Yes |
| BPDU filtering/protection | Yes |
| IP-MAC-Port binding | Yes |
| Authentication | MAC-based authentication, Port-based authentication |
| IGMP snooping | Yes |
| Access Control List (ACL) | Yes |
| System event log | Yes |
| ARP inspection | Yes |
| Configuring Location Settings (CLI) | Yes |
| Web-based management | Yes |
| Cloud-managed | Yes |
| Quality of Service (QoS) support | Yes |
| Switch layer | L2/L2+ |
| Switch type | Managed |
| Power consumption (max) | 77.8 W |
The TP-Link Omada 8-PORT Managed Gigabit Rack Switch, POE+(8), SFP(2), 61W is enterprise networking hardware for data-center, campus, and branch deployments. Common roles include core/distribution switching, server uplinks, top-of-rack fabric, and edge connectivity in mixed Cisco/Arista environments.
Key specifications for the TP-Link Omada 8-PORT Managed Gigabit Rack Switch, POE+(8), SFP(2), 61W: new condition; power connector DC-in jack; sfp module slots quantity 2; basic switching rj-45 ethernet ports type Gigabit Ethernet (10/100/1000); basic switching rj-45 ethernet ports quantity 8; vlan support Yes; flow control support Yes. Manufacturer part number SG2210P. For the full datasheet with electrical, environmental, and compliance details, contact our pre-sales engineering team.
The TP-Link Omada 8-PORT Managed Gigabit Rack Switch, POE+(8), SFP(2), 61W interoperates with standard switching protocols (LACP, MLAG/VPC, 802.1Q, OSPF/BGP). For specific cross-vendor scenarios — Cisco-to-Arista MLAG peering, fabric integration with Cumulus/SONiC, or migration from legacy Catalyst — our network engineers map a compatibility plan as part of the RFQ.
