Brand: TP-Link | Category: Network Switches
SKU: SG2218P | Part #: SG2218P | MPN: SG2218P
Contact for Pricing — Request a Quote
The TP-Link Omada SG2218P is an 18-port managed Gigabit rack switch from the Omada range. It provides 16 Gigabit Ethernet RJ-45 ports (10/100/1000 Mbit/s) with PoE+ and a 150W power budget, plus 2 SFP module slots for fibre uplinks. The switch does not support 10G.
Management and traffic features include VLAN support, link aggregation, spanning tree protocol, flow control, broadcast storm control, rate limiting, IP routing and policy-based routing. Ports support auto-negotiation and auto MDI/MDI-X. The switch has 4.1 MB of packet buffer memory, an 8000-entry MAC address table and jumbo frame support. Supported standards include IEEE 802.1D, 802.1Q, 802.1p, 802.1s, 802.1w, 802.1x, 802.3ab, 802.3ad, 802.3az, 802.3i, 802.3u, 802.3x and 802.3z.
As a rack-mount PoE+ switch, it suits business networks that need to power and connect devices such as access points, IP phones or cameras over Ethernet.
Send the part number through our RFQ form and our team will reply within 48 hours.
| Brand | TP-Link |
| Category | Network Switches |
| SKU | SG2218P |
| Part Number | SG2218P |
| Condition | New |
| SFP module slots quantity | 2 |
| Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
| Basic switching RJ-45 Ethernet ports quantity | 16 |
| VLAN support | Yes |
| Flow control support | Yes |
| Link aggregation | Yes |
| Broadcast storm control | Yes |
| Rate limiting | Yes |
| Auto MDI/MDI-X | Yes |
| Spanning tree protocol | Yes |
| Ethernet LAN data rates | 10,100,1000 Mbit/s |
| Auto-negotiation | Yes |
| IP routing | Yes |
| Policy-based routing | Yes |
| 10G support | No |
| Networking standards | IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3az, IEEE 802.3i, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z |
| Packet buffer memory | 4.1 MB |
| Jumbo frames | 9 |
| Jumbo frames support | Yes |
| MAC address table | 8000 entries |
| Forwarding rate | 26.78 Mpps |
| Switching capacity | 26.78 Gbit/s |
| Total Power over Ethernet (PoE) budget | 150 W |
| Power over Ethernet (PoE) | Yes |
| MAC address filtering | Yes |
| Static port security | Yes |
| SSH/SSL support | Yes |
| Loop protection | Yes |
| BPDU filtering/protection | Yes |
| Authentication | MAC-based authentication, Port-based authentication |
| Access Control List (ACL) | Yes |
| DHCP features | DHCP client, DHCP relay, DHCP snooping |
| MIB support | MIB II (RFC1213), Bridge MIB (RFC1493), P/Q-Bridge MIB (RFC2674), Radius Accounting Client MIB (RFC2620), Radius Authentication Client MIB (RFC2618), Remote Ping, Traceroute MIB (RFC2925), Support TP-Link private MIBs, RMON MIB(RFC1757, rmon 1,2,3,9) |
| System event log | Yes |
| ARP inspection | Yes |
| Configuring Location Settings (CLI) | Yes |
| Web-based management | Yes |
| Cloud-managed | Yes |
| Quality of Service (QoS) support | Yes |
| Switch layer | L2/L2+ |
The TP-Link Omada 18-PORT Managed Gigabit Rack Switch, POE+(16), SFP(2), 150W is enterprise networking hardware for data-center, campus, and branch deployments. Common roles include core/distribution switching, server uplinks, top-of-rack fabric, and edge connectivity in mixed Cisco/Arista environments.
Key specifications for the TP-Link Omada 18-PORT Managed Gigabit Rack Switch, POE+(16), SFP(2), 150W: new condition; sfp module slots quantity 2; basic switching rj-45 ethernet ports type Gigabit Ethernet (10/100/1000); basic switching rj-45 ethernet ports quantity 16; vlan support Yes; flow control support Yes; link aggregation Yes. Manufacturer part number SG2218P. For the full datasheet with electrical, environmental, and compliance details, contact our pre-sales engineering team.
The TP-Link Omada 18-PORT Managed Gigabit Rack Switch, POE+(16), SFP(2), 150W interoperates with standard switching protocols (LACP, MLAG/VPC, 802.1Q, OSPF/BGP). For specific cross-vendor scenarios — Cisco-to-Arista MLAG peering, fabric integration with Cumulus/SONiC, or migration from legacy Catalyst — our network engineers map a compatibility plan as part of the RFQ.
