Solidigm P5630 Enterprise SSD (Expected)

Brand: Solidigm | Category: Enterprise SSDs

SKU: SSDPF2IE153TZ02 | Part #: SSDPF2IE153TZ02 | MPN: SSDPF2IE153TZ02

Contact for Pricing — Request a Quote

The Solidigm P5630 is a 15.36 TB enterprise-class SSD designed to fit the U.2 2.5-inch form factor, which occupies standard 2.5-inch hot-swap bays found in most modern data centre server chassis and storage appliances. This physical specification matters because it means minimal infrastructure redesign—your existing server backplanes that support U.2 drives via SFF-8639 connectors will accept the SSDPF2IE153TZ02 without requiring adapter cards or custom mounting solutions. Once installed, the drive connects directly to your PCIe 4.0 x4 NVMe interface, delivering sequential read performance up to 7,000 MB/s and sequential write throughput of 3,400 MB/s. At queue depth, the P5630 sustains random 4K read operations at 1.5 million IOPS, with random write capacity reaching 175,000 IOPS—performance metrics that storage architects and infrastructure teams rely on when sizing arrays for mixed workload environments.

Solidigm engineered this drive around 144-layer QLC NAND technology, a density-first approach that allows manufacturers to pack more capacity into the same physical footprint while maintaining enterprise-grade reliability standards. The 15.36 TB capacity per drive significantly reduces the number of slots needed in a storage array, which translates to lower power consumption per terabyte, reduced cooling overhead, and simplified cable management in high-density deployments. The trade-off inherent to QLC technology—write endurance measured at 28,000 total bytes written (TBW)—sits comfortably within the operational profile of read-heavy workloads typical in archival systems, cold data repositories, and backup appliances. A drive writes per day rating of 1 DWPD confirms that Solidigm positions the P5630 as a mainstream capacity tier, not a performance-first product, yet the sequential write speed of 3,400 MB/s ensures that even sustained sequential writes remain responsive in production environments.

Enterprise deployments demand data integrity guarantees that consumer and prosumer SSDs simply do not provide. The Solidigm P5630 incorporates AES 256-bit encryption with TCG Opal 2.0 compliance, allowing your security and infrastructure teams to enforce full-disk encryption at the hardware level without relying on software encryption layers that consume CPU resources. Power loss protection via capacitor-backed power loss injection (PLI) safeguards in-flight writes, preventing data corruption during unexpected power events—a critical feature in systems where uninterruptible power supplies may not reach every drive simultaneously. End-to-end data protection mechanisms embedded in the SSDPF2IE153TZ02 detect and correct errors across the entire I/O path, from host to NAND and back, reducing the likelihood that silent data corruption reaches your file systems. The drive maintains these protections across an operating temperature window of 0°C to 70°C and draws approximately 14W during active read operations, a thermal and electrical profile that fits comfortably within the constraints of modern blade servers and 2U/4U appliances.

Storage architects evaluating the P5630 should consider it within the context of workload tiers rather than as a universal SSD. Its strength lies in capacity-optimized deployments where sequential throughput matters more than sub-millisecond latency and where write cycles remain moderate—content distribution networks serving read-heavy multimedia, nearline archival systems transitioning between hot and cold storage tiers, and data lake platforms ingesting structured and semi-structured data fall into this category. The NVMe 1.4 specification ensures forward compatibility with controller firmware updates and advanced queue management features, protecting your infrastructure investment against near-term protocol evolution. System integrators and channel partners familiar with Solidigm's enterprise SSD lineups will recognize the P5630 as a natural successor to earlier SATA-based capacity drives, offering the performance step-up that justifies server backplane PCIe lanes without the premium associated with TLC-based performance-tier products.

Omnixon Global stocks and supplies the Solidigm P5630 (SSDPF2IE153TZ02) across the GCC region, with same-region fulfillment to data centres, AI infrastructure operators, and enterprise IT teams across the UAE, Saudi Arabia, and neighbouring markets. We maintain direct relationships with Solidigm and regional distribution partners, ensuring that lead-time expectations and stock availability align with your procurement cycles. Request a formal quotation through our portal or contact our enterprise sales team to discuss volume pricing, technical specifications, compatibility with your current infrastructure, and integration support for your specific deployment scenario.

Performance and Reliability Specifications

• Sequential read speed up to 7,000 MB/s; sequential write speed up to 3,400 MB/s over PCIe 4.0 x4 NVMe interface
• Random 4K IOPS: 1.5 million read operations, 175,000 write operations at queue depth
• 15.36 TB capacity per drive using 144-layer QLC 3D NAND technology
• 28,000 TBW endurance rating with 1 DWPD drive writes per day specification
• Hardware-based AES 256-bit encryption (TCG Opal 2.0) and capacitor-backed power loss protection (PLI)
• End-to-end data protection with error detection and correction across entire I/O path
• U.2 2.5-inch 15mm form factor (SFF-8639 connector) compatible with standard server backplanes
• Operating temperature range 0°C to 70°C; active read power consumption approximately 14W