Brand: Kingston | Category: Enterprise SSDs
SKU: SKC600/2048G | Part #: SKC600/2048G | MPN: SKC600/2048G
Contact for Pricing — Request a Quote
The Kingston KC600 2TB (part number SKC600/2048G) is a 2.5" 7mm solid-state drive with a Serial ATA III interface operating at 6 Gbit/s. It uses 3D TLC NAND memory with an SMI SM2259 controller and is designed as a component for PCs and laptops.
Rated sequential speeds are up to 550 MB/s read and 520 MB/s write, with 4KB random performance of up to 90,000 IOPS read and 80,000 IOPS write. The drive carries a TBW rating of 1200 and an MTBF of 2,000,000 hours. Hardware encryption is supported with 256-bit AES-XTS and TCG Opal 2.0. Power consumption is 0.06 W idle, 0.2 W average, 1.3 W during reads and 3.2 W during writes, and non-operating vibration tolerance is 20 G.
This SSD suits desktop and notebook systems that use a 2.5" SATA bay, including storage upgrades where encrypted local storage is required.
Send the part number through our RFQ form and our team will reply within 48 hours.
| Brand | Kingston |
| Category | Enterprise SSDs |
| SKU | SKC600/2048G |
| Part Number | SKC600/2048G |
| Condition | New |
| Capacity | 2 TB |
| Form Factor | 2.5" 7mm |
| Interface | SATA 6Gb/s |
| TBW rating | 1200 |
| Mean time between failures (MTBF) | 2000000 h |
| Controller type | SMI SM2259 |
| Random write (4KB) | 80000 IOPS |
| Random read (4KB) | 90000 IOPS |
| Write speed | 520 MB/s |
| Read speed | 550 MB/s |
| Data transfer rate | 6 Gbit/s |
| Hardware encryption | Yes |
| Component for | PC/Laptop |
| Memory type | 3D TLC NAND |
| Interface | Serial ATA III |
| SSD form factor | 2.5" |
| SSD capacity | 2 TB |
| Security algorithms | 256-bit AES-XTS, TCG Opal 2.0 |
| Power consumption (idle) | 0.06 W |
| Power consumption (average) | 0.2 W |
| Power consumption (write) | 3.2 W |
| Power consumption (read) | 1.3 W |
| Non-operating vibration | 20 G |
| Operating vibration | 2.17 G |
| Storage temperature (T-T) | -40 - 85 °C |
| Operating temperature (T-T) | 0 - 70 °C |
| Weight | 40 g |
| Height | 7 mm |
| Depth | 100.1 mm |
| Width | 69.8 mm |
At 2 TB, the Kingston KC600 2TB 2.5" 7mm SATA SSD suits enterprise data-center storage tiers — all-flash arrays, hyperconverged storage pools (vSAN, Ceph), database backends, and high-throughput backup repositories. The SATA 6Gb/s interface is supported by major server platforms.
Key specifications for the Kingston KC600 2TB 2.5" 7mm SATA SSD: capacity 2 TB; form factor 2.5" 7mm; interface SATA 6Gb/s; new condition; tbw rating 1200; mean time between failures (mtbf) 2000000 h; controller type SMI SM2259; random write (4kb) 80000 IOPS; random read (4kb) 90000 IOPS; write speed 520 MB/s. Manufacturer part number SKC600/2048G. For the full datasheet with electrical, environmental, and compliance details, contact our pre-sales engineering team.
The Kingston KC600 2TB 2.5" 7mm SATA SSD uses a SATA 6Gb/s interface in a 2.5" 7mm form factor. It's compatible with server platforms that expose this interface — typical deployments include Dell PowerEdge, HPE ProLiant, Lenovo ThinkSystem, and Supermicro SuperServer chassis. For specific vendor part-number compatibility, our team validates against the manufacturer support matrix.
