Brand: TP-Link | Category: Network Switches
SKU: TL-SG116P | Part #: TL-SG116P | MPN: TL-SG116P
Contact for Pricing — Request a Quote
The TP-Link TL-SG116P is an unmanaged Gigabit switch in a metal case with 16 RJ-45 ports supporting 10/100/1000 Mbps. All 16 ports provide PoE+ from a 120W power budget, so a single cable can carry both data and power to connected powered devices.
The switch has a 4.1 MB packet buffer and supports 9000-byte jumbo frames, flow control, full duplex, auto-negotiation, Auto MDI/MDI-X, broadcast storm control and cable length detection. It works with Cat3, Cat4, Cat5, Cat5e and Cat6 cabling over 10BASE-T, 100BASE-TX and 1000BASE-T, and complies with IEEE 802.3, 802.3u, 802.3ab, 802.1p and 802.1Q.
It suits office and small business networks that need to connect and power multiple PoE devices from one switch, such as access points, IP phones or IP cameras.
Send the part number through our RFQ form and our team will reply within 48 hours.
| Brand | TP-Link |
| Category | Network Switches |
| SKU | TL-SG116P |
| Part Number | TL-SG116P |
| Condition | New |
| Gigabit Ethernet (copper) ports quantity | 16 |
| Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
| Basic switching RJ-45 Ethernet ports quantity | 16 |
| Number of VLANs | 32 |
| Virtual LAN features | Protocol-based VLAN, Tagged VLAN |
| VLAN support | Yes |
| Flow control support | Yes |
| Link aggregation | Yes |
| Broadcast storm control | Yes |
| Rate limiting | Yes |
| Auto MDI/MDI-X | Yes |
| Auto-negotiation | Yes |
| Cable length detection | Yes |
| Full duplex | Yes |
| Port mirroring | Yes |
| Cable types supported | Cat3, Cat4, Cat5, Cat5e, Cat6 |
| Copper ethernet cabling technology | 10BASE-T, 100BASE-TX, 1000BASE-T |
| Networking standards | IEEE 802.1Q, IEEE 802.1p, IEEE 802.3, IEEE 802.3ab, IEEE 802.3u |
| Packet buffer memory | 4.1 MB |
| Jumbo frames | 9000 |
| Jumbo frames support | Yes |
| Number of queues | 4 |
| Store-and-forward | Yes |
| MAC address table | 8000 entries |
| Forwarding rate | 23.81 Mpps |
| Switching capacity | 32 Gbit/s |
| Power over Ethernet (PoE) | Yes |
| Loop protection | Yes |
| IGMP snooping | Yes |
| Quality of Service (QoS) support | Yes |
| Switch type | Unmanaged |
| Power consumption (max) | 144.28 W |
| Power consumption (typical) | 11.72 W |
| Input current | 0.6 A |
| DC input voltage | 9 V |
| AC input frequency | 50 Hz |
| AC input voltage | 220 V |
| Power supply included | Yes |
| Wall mountable | Yes |
| LED indicators | Yes |
The TP-Link 16-PORT Unmanaged Gigabit Switch, POE+(16), 120W, Metal Case is enterprise networking hardware for data-center, campus, and branch deployments. Common roles include core/distribution switching, server uplinks, top-of-rack fabric, and edge connectivity in mixed Cisco/Arista environments.
Key specifications for the TP-Link 16-PORT Unmanaged Gigabit Switch, POE+(16), 120W, Metal Case: new condition; gigabit ethernet (copper) ports quantity 16; basic switching rj-45 ethernet ports type Gigabit Ethernet (10/100/1000); basic switching rj-45 ethernet ports quantity 16; number of vlans 32; virtual lan features Protocol-based VLAN, Tagged VLAN; vlan support Yes. Manufacturer part number TL-SG116P. For the full datasheet with electrical, environmental, and compliance details, contact our pre-sales engineering team.
The TP-Link 16-PORT Unmanaged Gigabit Switch, POE+(16), 120W, Metal Case interoperates with standard switching protocols (LACP, MLAG/VPC, 802.1Q, OSPF/BGP). For specific cross-vendor scenarios — Cisco-to-Arista MLAG peering, fabric integration with Cumulus/SONiC, or migration from legacy Catalyst — our network engineers map a compatibility plan as part of the RFQ.
