Transcend SSD452P2 480GB 2.5-inch SATA III Industrial SSD
Brand: Transcend | Category: Enterprise SSDs
SKU: TRAN-TS480GSSD452P2 | Part #: TS480GSSD452P2 | MPN: TS480GSSD452P2
Contact for Pricing — Request a Quote
About the Transcend SSD452P2 480GB 2.5-inch SATA III Industrial SSD
The Transcend SSD452P2 480GB is a 2.5-inch SATA III industrial solid-state drive built on a 3D NAND architecture with a dedicated SLC caching layer that accelerates burst write performance while maintaining sustained throughput under continuous workloads. Designed to slot directly into standard enterprise storage bays, server trays, and ruggedized embedded systems, it bridges the gap between consumer-grade drives and full enterprise NVMe deployments where SATA interface compatibility remains a hard requirement. The drive's internal firmware implements intelligent wear-leveling algorithms, bad-block management, and TRIM support to extend operational lifespan across multi-year continuous-duty cycles.
A distinguishing capability of the SSD452P2 is its Power Guard circuit, which monitors the supply rail and automatically flushes the write cache to NAND in the event of unexpected power interruption. This hardware-level protection prevents data corruption in industrial controller racks, edge computing nodes, and storage appliances where power stability cannot always be guaranteed. The drive is built to operate across an extended temperature range, making it suitable for deployment in environments that exceed the thermal limits of standard commercial-grade SSDs, including factory-floor embedded systems, transportation compute modules, and outdoor enclosures.
With a native SATA 6 Gb/s interface and 2.5-inch, 7mm form factor, the SSD452P2 integrates without hardware modification into existing SAS/SATA backplanes, NAS enclosures, and legacy server chassis. Its industrial positioning targets organizations running long-lifecycle infrastructure where drive replacement cycles are measured in years and reliability metrics — including MTTF ratings and DWPD specifications — take precedence over peak sequential throughput numbers. The drive ships with DevSleep low-power state support, reducing idle power draw in always-on edge deployments.
Ideal for
- Legacy enterprise server storage bay replacement where SATA III interface compatibility is mandatory and NVMe retrofitting is cost-prohibitive
- Industrial edge computing nodes and embedded controllers requiring extended temperature operation and power-loss data integrity
- NAS enclosures and storage appliances running continuous read-intensive workloads such as surveillance video indexing or log archiving
- Transportation and vehicle-mounted computing systems subject to vibration, thermal cycling, and intermittent power events
- Factory-floor HMI and SCADA controller storage where long operational lifecycles and high-humidity tolerance are critical requirements
- Thin-client and diskless workstation refresh programs replacing aging HDDs in fixed-function enterprise desktop infrastructure
Technical specifications
| Manufacturer | Transcend |
| Model | SSD452P2 |
| Capacity | 480 GB |
| Form Factor | 2.5-inch |
| Height | 7 mm |
| Interface | SATA III 6 Gb/s (backward compatible with SATA II) |
| NAND Flash Type | 3D NAND with SLC Caching |
| Controller | Industrial-grade SSD controller with advanced ECC engine |
| Sequential Read Speed | Up to 560 MB/s |
| Sequential Write Speed | Up to 500 MB/s |
| Random Read IOPS (4K) | Up to 85,000 IOPS |
| Random Write IOPS (4K) | Up to 80,000 IOPS |
| Power Guard | Hardware power-loss protection with automatic cache flush to NAND |
| Operating Temperature | -40°C to 85°C (extended industrial range) |
| Storage Temperature | -40°C to 85°C |
| Mean Time Between Failures (MTTF) | 3,000,000 hours |
| Endurance (TBW) | 560 TBW |
| DWPD | Approximately 0.32 DWPD over 5-year operational lifecycle |
| Power Consumption (Active Read) | Approx. 2.3 W |
| Power Consumption (DevSleep) | Approx. 2 mW |
| Dimensions | 100.0 mm × 69.85 mm × 7.0 mm |
| Weight | Approx. 52 g |
| Supported Commands | TRIM, S.M.A.R.T., DevSleep, NCQ |
| Vibration Resistance | 20G peak (10–2000 Hz) |
| Shock Resistance | 1500G / 0.5 ms half-sine wave |
Available from Omnixon Global. Submit an RFQ and our team will confirm configuration and availability for your order.
Technical Specifications
| Brand | Transcend |
| Category | Enterprise SSDs |
| SKU | TRAN-TS480GSSD452P2 |
| Part Number | TS480GSSD452P2 |
| Condition | New |
| Model | SSD452P2 |
| Capacity | 480 GB |
| Form Factor | 2.5-inch |
| Height | 7 mm |
| Interface | SATA III 6 Gb/s (backward compatible with SATA II) |
| NAND Flash Type | 3D NAND with SLC Caching |
| Controller | Industrial-grade SSD controller with advanced ECC engine |
| Sequential Read Speed | Up to 560 MB/s |
| Sequential Write Speed | Up to 500 MB/s |
| Random Read IOPS (4K) | Up to 85,000 IOPS |
| Random Write IOPS (4K) | Up to 80,000 IOPS |
| Power Guard | Hardware power-loss protection with automatic cache flush to NAND |
| Operating Temperature | -40°C to 85°C (extended industrial range) |
| Storage Temperature | -40°C to 85°C |
| Mean Time Between Failures (MTTF) | 3,000,000 hours |
| Endurance (TBW) | 560 TBW |
| DWPD | Approximately 0.32 DWPD over 5-year operational lifecycle |
| Power Consumption (Active Read) | Approx. 2.3 W |
| Power Consumption (DevSleep) | Approx. 2 mW |
| Dimensions | 100.0 mm × 69.85 mm × 7.0 mm |
| Weight | Approx. 52 g |
| Supported Commands | TRIM, S.M.A.R.T., DevSleep, NCQ |
| Vibration Resistance | 20G peak (10–2000 Hz) |
| Shock Resistance | 1500G / 0.5 ms half-sine wave |
Frequently Asked Questions about Transcend SSD452P2 480GB 2.5-inch SATA III Industrial SSD
What does the Transcend SSD452P2 480GB 2.5-inch SATA III Industrial SSD do?
the Transcend SSD452P2 480GB 2.5-inch SATA III Industrial SSD suits enterprise data-center storage tiers — all-flash arrays, hyperconverged storage pools (vSAN, Ceph), database backends, and high-throughput backup repositories. It is supported by major server platforms.
What does the Transcend SSD452P2 480GB 2.5-inch SATA III Industrial SSD do?
the Transcend SSD452P2 480GB 2.5-inch SATA III Industrial SSD suits enterprise data-center storage tiers — all-flash arrays, hyperconverged storage pools (vSAN, Ceph), database backends, and high-throughput backup repositories. It is supported by major server platforms.
What are the headline specs of the Transcend SSD452P2 480GB 2.5-inch SATA III Industrial SSD?
Key specifications for the Transcend SSD452P2 480GB 2.5-inch SATA III Industrial SSD: new condition; manufacturer Transcend; model SSD452P2; capacity 480 GB; form factor 2.5-inch; height 7 mm; interface SATA III 6 Gb/s (backward compatible with SATA II). Manufacturer part number TS480GSSD452P2. For the full datasheet with electrical, environmental, and compliance details, contact our pre-sales engineering team.
What are the headline specs of the Transcend SSD452P2 480GB 2.5-inch SATA III Industrial SSD?
Key specifications for the Transcend SSD452P2 480GB 2.5-inch SATA III Industrial SSD: new condition; manufacturer Transcend; model SSD452P2; capacity 480 GB; form factor 2.5-inch; height 7 mm; interface SATA III 6 Gb/s (backward compatible with SATA II). Manufacturer part number TS480GSSD452P2. For the full datasheet with electrical, environmental, and compliance details, contact our pre-sales engineering team.