Transcend MTE260T M.2 2280 PCIe NVMe Industrial SSD
Brand: Transcend | Category: Enterprise SSDs
SKU: TRAN-TS1TMTE260T | Part #: TS1TMTE260T | MPN: TS1TMTE260T
Contact for Pricing — Request a Quote
About the Transcend MTE260T M.2 2280 PCIe NVMe Industrial SSD
The Transcend MTE260T is an industrial-grade M.2 2280 NVMe solid-state drive built on PCIe Gen4 x4 interface technology, delivering sequential read performance suited to demanding embedded computing and edge enterprise workloads. Leveraging 112-layer 3D NAND flash, the MTE260T achieves an optimal balance between high-density storage capacity and sustained endurance, making it a reliable core storage component for systems that demand continuous operation without the thermal or reliability compromises found in consumer-grade alternatives.
Designed explicitly for industrial and edge environments, the MTE260T supports an extended operating temperature range that accommodates harsh deployment conditions including factory automation controllers, transportation systems, ruggedized edge servers, and outdoor IoT gateway platforms. Transcend incorporates advanced firmware-level data protection features including power loss protection circuitry, ensuring in-flight data integrity even during sudden power interruption events — a critical requirement in unattended or remote deployments where manual recovery is not practical.
The drive's NVMe 1.4 protocol compliance enables low-latency queue depths and command set efficiencies that translate to responsive performance under concurrent mixed read/write workloads. Industrial-grade qualification testing, conformance to wide-temperature specifications, and enhanced endurance ratings distinguish the MTE260T from mainstream consumer NVMe drives, positioning it as the purpose-built choice for system integrators and developing long-lifecycle embedded platforms, medical instrumentation, edge AI inference appliances, and intelligent transportation units.
Ideal for
- Edge AI inference appliances requiring sustained high-throughput NVMe storage across wide ambient temperature ranges
- Industrial automation controllers and PLC-adjacent embedded computing nodes demanding long-lifecycle, high-endurance flash storage
- Transportation and fleet management onboard computing systems where vibration resistance and wide-temperature operation are mandatory
- Medical imaging and diagnostic instrumentation platforms requiring data integrity protection and reliable write endurance
- Ruggedized edge servers and IoT gateway deployments in outdoor or thermally uncontrolled environments
- Digital signage and smart retail kiosks operating in variable-temperature enclosures requiring continuous write workloads
Technical specifications
| Manufacturer | Transcend |
| Model | MTE260T |
| Form Factor | M.2 2280 (80mm) |
| Interface | PCIe Gen4 x4 |
| Protocol | NVMe 1.4 |
| NAND Flash Technology | 112-layer 3D NAND |
| Operating Temperature | -40°C to 85°C (industrial wide-temperature) |
| Storage Temperature | -40°C to 85°C |
| Sequential Read Speed | Up to 5,000 MB/s |
| Sequential Write Speed | Up to 4,500 MB/s |
| Power Loss Protection | Yes (hardware-based capacitor-backed) |
| Data Integrity | End-to-end data path protection with ECC |
| Vibration Resistance | Compliant with industrial shock and vibration standards |
| Endurance Rating | High TBW industrial-grade endurance (capacity-dependent) |
| MTBF | 2,000,000 hours |
| Thermal Throttling Management | Adaptive thermal control firmware |
| Secure Erase | Supported (ATA Secure Erase / NVMe Sanitize) |
| S.M.A.R.T. Support | Yes |
| Dimensions | 80mm x 22mm x 3.58mm |
| PCIe Lanes | x4 |
| Target Application | Industrial embedded, edge enterprise, transportation, medical instrumentation |
| Launch Generation | 2025 Q3 |
Available from Omnixon Global. Submit an RFQ and our team will confirm configuration and availability for your order.
Technical Specifications
| Brand | Transcend |
| Category | Enterprise SSDs |
| SKU | TRAN-TS1TMTE260T |
| Part Number | TS1TMTE260T |
| Condition | New |
| Model | MTE260T |
| Form Factor | M.2 2280 (80mm) |
| Interface | PCIe Gen4 x4 |
| Protocol | NVMe 1.4 |
| NAND Flash Technology | 112-layer 3D NAND |
| Operating Temperature | -40°C to 85°C (industrial wide-temperature) |
| Storage Temperature | -40°C to 85°C |
| Sequential Read Speed | Up to 5,000 MB/s |
| Sequential Write Speed | Up to 4,500 MB/s |
| Power Loss Protection | Yes (hardware-based capacitor-backed) |
| Data Integrity | End-to-end data path protection with ECC |
| Vibration Resistance | Compliant with industrial shock and vibration standards |
| Endurance Rating | High TBW industrial-grade endurance (capacity-dependent) |
| MTBF | 2,000,000 hours |
| Thermal Throttling Management | Adaptive thermal control firmware |
| Secure Erase | Supported (ATA Secure Erase / NVMe Sanitize) |
| S.M.A.R.T. Support | Yes |
| Dimensions | 80mm x 22mm x 3.58mm |
| PCIe Lanes | x4 |
| Target Application | Industrial embedded, edge enterprise, transportation, medical instrumentation |
| Launch Generation | 2025 Q3 |
Frequently Asked Questions about Transcend MTE260T M.2 2280 PCIe NVMe Industrial SSD
What does the Transcend MTE260T M.2 2280 PCIe NVMe Industrial SSD do?
the Transcend MTE260T M.2 2280 PCIe NVMe Industrial SSD suits enterprise data-center storage tiers — all-flash arrays, hyperconverged storage pools (vSAN, Ceph), database backends, and high-throughput backup repositories. It is supported by major server platforms.
What are the headline specs of the Transcend MTE260T M.2 2280 PCIe NVMe Industrial SSD?
Key specifications for the Transcend MTE260T M.2 2280 PCIe NVMe Industrial SSD: new condition; manufacturer Transcend; model MTE260T; form factor M.2 2280 (80mm); interface PCIe Gen4 x4; protocol NVMe 1.4; nand flash technology 112-layer 3D NAND. Manufacturer part number TS1TMTE260T. For the full datasheet with electrical, environmental, and compliance details, contact our pre-sales engineering team.