Panduit NetRunner Horizontal Cable Manager, 2U, Double-Sided with Cover, 4-Inch Fingers
Brand: Panduit | Category: Accessories & Components
SKU: PAND-WMPLFXE | Part #: WMPLFXE | MPN: WMPLFXE
Contact for Pricing — Request a Quote
About the Panduit NetRunner Horizontal Cable Manager, 2U, Double-Sided with Cover, 4-Inch Fingers
The Panduit NetRunner WMPLFXE is a 2U horizontal cable management panel designed to route and protect patch cords emerging from high-density 1U and 2U patch panels in data center and telecommunications room racks. The double-sided design includes front-facing and rear-facing finger channels, each with 4-inch-deep cable retention fingers, enabling simultaneous management of front patch cord routing and rear cable consolidation without interference between the two planes. The hinged snap-on cover protects cable runs from accidental pulls and allows quick tool-less access for MAC (moves, adds, changes) work.
Constructed from high-impact thermoplastic with steel mounting flanges, the manager integrates directly to EIA-310-D 19-inch racks via the included hardware and provides 19 individual finger slots per side with a 1.25-inch pitch, accommodating up to Category 8 shielded patch cords with oversized boots. The cable entry and exit ports on both sides of the channel include integral snap-in grommets to prevent jacket abrasion, a feature critical in financial services and healthcare environments with structured cabling compliance requirements.
This product is typically purchased in quantities of 24-48 units per rack installation project and is one of Panduit's highest-volume accessory SKUs for enterprise deployments. It is compatible with all Panduit NetKey, GigaStation, and Mini-Com modular patch panel families and is specified in Panduit's CPAK (Connectivity Performance Assurance Kits) for end-to-end structured cabling system compliance.
Ideal for
- Horizontal patch cord management above and below 1U copper patch panels in 42U data racks
- Cable organization in high-density ToR switch deployments with 48-port downlinks
- MAC (moves, adds, changes) workflow optimization in colocation and enterprise IDFs
- Front and rear simultaneous cable management in dual-faced MDA/HDA panels
- Structured cabling compliance requiring Panduit end-to-end component integration
- NOC and network closet builds where cable identification and neatness are required by SLA
Technical specifications
| Manufacturer | Panduit |
| Part Number | WMPLFXE |
| Form Factor | 2U Horizontal Rack-Mount Cable Manager |
| Mounting Standard | 19-inch EIA-310-D |
| Sides | Double-Sided (Front and Rear) |
| Finger Depth | 4 inches (front and rear) |
| Finger Count (per side) | 19 fingers at 1.25-inch pitch |
| Cover Type | Hinged snap-on cover with tool-less access |
| Cable Capacity | Up to 48 x Cat6A or Cat8 patch cords per side typical |
| Maximum Patch Cord OD Supported | 8.5 mm (accommodates shielded Cat8 boots) |
| Material (Body) | High-impact thermoplastic ABS |
| Material (Flanges) | 16-gauge steel |
| Color | Black |
| Height | 2U (88.9 mm) |
| Width | 482.6 mm (19 inches) |
| Depth (Front) | 127 mm |
| Grommets | Integral snap-in cable entry/exit grommets both sides |
| Mounting Hardware | Included (10-32 and 12-24 rack screws and clip nuts) |
| Standards Compliance | ANSI/TIA-569-D, EIA-310-D |
| Compatible Systems | Panduit NetKey, GigaStation2, Mini-Com, category patch panels |
| RoHS Compliance | Yes |
| UL Listing | UL Listed |
Available from Omnixon Global. Submit an RFQ and our team will confirm configuration and availability for your order.
Technical Specifications
| Brand | Panduit |
| Category | Accessories & Components |
| SKU | PAND-WMPLFXE |
| Part Number | WMPLFXE |
| Condition | New |
| Form Factor | 2U Horizontal Rack-Mount Cable Manager |
| Mounting Standard | 19-inch EIA-310-D |
| Sides | Double-Sided (Front and Rear) |
| Finger Depth | 4 inches (front and rear) |
| Finger Count (per side) | 19 fingers at 1.25-inch pitch |
| Cover Type | Hinged snap-on cover with tool-less access |
| Cable Capacity | Up to 48 x Cat6A or Cat8 patch cords per side typical |
| Maximum Patch Cord OD Supported | 8.5 mm (accommodates shielded Cat8 boots) |
| Material (Body) | High-impact thermoplastic ABS |
| Material (Flanges) | 16-gauge steel |
| Color | Black |
| Height | 2U (88.9 mm) |
| Width | 482.6 mm (19 inches) |
| Depth (Front) | 127 mm |
| Grommets | Integral snap-in cable entry/exit grommets both sides |
| Mounting Hardware | Included (10-32 and 12-24 rack screws and clip nuts) |
| Standards Compliance | ANSI/TIA-569-D, EIA-310-D |
| Compatible Systems | Panduit NetKey, GigaStation2, Mini-Com, category patch panels |
| RoHS Compliance | Yes |
| UL Listing | UL Listed |
Frequently Asked Questions about Panduit NetRunner Horizontal Cable Manager, 2U, Double-Sided with Cover, 4-Inch Fingers
What does the Panduit NetRunner Horizontal Cable Manager, 2U, Double-Sided with Cover, 4-Inch Fingers do?
The Panduit NetRunner Horizontal Cable Manager, 2U, Double-Sided with Cover, 4-Inch Fingers is enterprise IT hardware deployed in production data centers, server rooms, and edge sites across the GCC and EMEA region.
What are the headline specs of the Panduit NetRunner Horizontal Cable Manager, 2U, Double-Sided with Cover, 4-Inch Fingers?
Key specifications for the Panduit NetRunner Horizontal Cable Manager, 2U, Double-Sided with Cover, 4-Inch Fingers: new condition; manufacturer Panduit; part number WMPLFXE; form factor 2U Horizontal Rack-Mount Cable Manager; mounting standard 19-inch EIA-310-D; sides Double-Sided (Front and Rear); finger depth 4 inches (front and rear). Manufacturer part number WMPLFXE. For the full datasheet with electrical, environmental, and compliance details, contact our pre-sales engineering team.