HPE 647594-B21 - HPE Ethernet 1Gb 4-port 331T Adapter

HPE 647594-B21 - HPE Ethernet 1Gb 4-port 331T Adapter

Brand: HPE | Category: Network Adapters & NICs

SKU: HPE-647594-B21 | Part #: 647594-B21 | MPN: 647594-B21

Contact for Pricing — Request a Quote

Request a Quote Contact Us

About the HPE 647594-B21 - HPE Ethernet 1Gb 4-port 331T Adapter

```html

TCP/IP checksum offload, Large Send Offload (LSO), and Receive Side Scaling (RSS) capabilities deliver reduced CPU overhead and improved throughput for bandwidth-intensive enterprise workloads. The HPE Ethernet 1Gb 4-port 331T Adapter (part number 647594-B21) combines these performance-enhancing offload engines with a quad-port gigabit design built on the Broadcom BCM5719 controller, making it an ideal choice for network engineers upgrading HPE ProLiant server infrastructure.

This HPE network adapter features four RJ-45 ports rated at 1 Gbps (10/100/1000BASE-T), connected via a PCIe 2.0 x4 host interface in a low-profile form factor suitable for dense rack deployments. Each port supports standard Cat5e or Cat6 UTP copper cabling with a maximum distance of 100 m per port at 1000BASE-T speeds. The card is compatible with HPE ProLiant Gen8 and select Gen9 rack and tower servers, with full support for NIC teaming in both active-active and active-passive modes, IEEE 802.1Q VLAN tagging, and jumbo frames up to 9 KB. Power is delivered directly through the PCIe slot—no auxiliary connector required. Supported operating systems include Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, and VMware ESXi, with management integration through HPE Insight Control and HPE Intelligent Provisioning.

Deployment Scenarios

  • Multi-NIC server aggregation and failover clustering in virtualized data centers
  • Legacy ProLiant Gen8/Gen9 network interface upgrades for sustained 1 Gbps workloads
  • VLAN-segmented production environments requiring low-latency packet processing and RSS load balancing
  • Compliance-driven deployments where CE, FCC, and RoHS certification is mandatory
  • Cost-effective four-port consolidation reducing physical switch port density

For procurement inquiries on HPE network adapters and enterprise IT hardware, contact Omnixon Global via RFQ.

```

Technical Specifications

BrandHPE
CategoryNetwork Adapters & NICs
SKUHPE-647594-B21
Part Number647594-B21
ConditionNew
Capacity1GB
Form FactorPCIe
InterfaceEthernet 1 Gb
Speed1 Gb/s per port
Manufacturer Part Number647594-B21
Product NameHPE Ethernet 1Gb 4-port 331T Adapter
Network ControllerBroadcom BCM5719
Number of Ports4
Port Speed1 Gbps (10/100/1000BASE-T)
Connector TypeRJ-45
Host InterfacePCIe 2.0 x4
Form FactorLow-profile
Compatible Server PlatformsHPE ProLiant Gen8, select Gen9 rack and tower servers
Offload EnginesTCP/IP checksum offload, Large Send Offload (LSO), Receive Side Scaling (RSS)
Cable Type SupportedCat5e or Cat6 UTP copper
Maximum Cable Distance100 m per port (1000BASE-T)
Operating System SupportWindows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, VMware ESXi
Management CompatibilityHPE Insight Control, HPE Intelligent Provisioning
NIC Teaming SupportYes (active-active and active-passive modes)
VLAN SupportYes (IEEE 802.1Q)
Jumbo Frame SupportYes (up to 9 KB)
Power ConsumptionLow-profile PCIe slot powered (no auxiliary connector required)
Regulatory ComplianceCE, FCC, RoHS

Frequently Asked Questions about HPE 647594-B21 - HPE Ethernet 1Gb 4-port 331T Adapter

What does the HPE 647594-B21 - HPE Ethernet 1Gb 4-port 331T Adapter do?

The HPE 647594-B21 - HPE Ethernet 1Gb 4-port 331T Adapter is enterprise networking hardware for data-center, campus, and branch deployments. Common roles include core/distribution switching, server uplinks, top-of-rack fabric, and edge connectivity in mixed Cisco/Juniper/Arista environments.

What are the headline specs of the HPE 647594-B21 - HPE Ethernet 1Gb 4-port 331T Adapter?

Key specifications for the HPE 647594-B21 - HPE Ethernet 1Gb 4-port 331T Adapter: form factor PCIe; interface Ethernet 1 Gb; 1 year manufacturer support; new condition. Manufacturer part number 647594-B21. For the full datasheet with electrical, environmental, and compliance details, contact our pre-sales engineering team.

Is the HPE 647594-B21 - HPE Ethernet 1Gb 4-port 331T Adapter compatible with my infrastructure?

The HPE 647594-B21 - HPE Ethernet 1Gb 4-port 331T Adapter interoperates with standard switching protocols (LACP, MLAG/VPC, 802.1Q, OSPF/BGP). For specific cross-vendor scenarios — Cisco-to-Arista MLAG peering, fabric integration with Cumulus/SONiC, or migration from legacy Catalyst — our network engineers map a compatibility plan as part of the RFQ.