Brand: Seagate | Category: Enterprise HDDs
SKU: ST4000NM000B | Part #: ST4000NM000B | MPN: ST4000NM000B
Contact for Pricing — Request a Quote
The Seagate Exos Enterprise ST4000NM000B is a 4 TB, 3.5" hard drive with a Serial ATA III interface supporting transfer rates of 6 Gbit/s. It spins at 7200 RPM, has an average latency of 4.16 ms and a 256 MB buffer. The drive is intended as a component for disk arrays.
It is rated for continuous operation, with an MTBF of 2,000,000 hours and an uncorrectable bit error rate of less than 1 per 10^15 bits read. Rotational vibration (RV) sensors are built in. Operating shock is rated at 70 G and non-operating shock at 300 G. Non-operating vibration is rated at 5 G, and the operating temperature range is 5 to 60 °C.
The drive runs on 5 / 12 V, with power consumption of 6.04 W at idle and 10.32 W typical. These characteristics suit it to multi-drive storage arrays and server environments that run around the clock.
Send the part number through our RFQ form and our team will reply within 48 hours.
| Brand | Seagate |
| Category | Enterprise HDDs |
| SKU | ST4000NM000B |
| Part Number | ST4000NM000B |
| Condition | New |
| Mean time between failures (MTBF) | 2000000 h |
| Continuous operation | Yes |
| Rotational Vibration (RV) sensors | Yes |
| Uncorrectable Bit Error Rate (UBER) | < 1 per 10^15 bits read |
| Average latency | 4.16 ms |
| HDD interface transfer rate | 6 Gbit/s |
| Component for | Disk array |
| Type | HDD |
| Interface | Serial ATA III |
| HDD size | 3.5" |
| Storage drive buffer size | 256 MB |
| HDD speed | 7200 RPM |
| HDD capacity | 4 TB |
| Operating voltage | 5 / 12 V |
| Power consumption (idle) | 6.04 W |
| Power consumption (typical) | 10.32 W |
| Non-operating shock | 300 G |
| Operating shock | 70 G |
| Non-operating vibration | 5 G |
| Operating temperature (T-T) | 5 - 60 °C |
| Weight | 650 g |
| Height | 26.1 mm |
| Depth | 147 mm |
| Width | 101.8 mm |
the Seagate Exos Enterprise 4TB, 3.5" SATA Hard Drive suits enterprise data-center storage tiers — all-flash arrays, hyperconverged storage pools (vSAN, Ceph), database backends, and high-throughput backup repositories. It is supported by major server platforms.
Key specifications for the Seagate Exos Enterprise 4TB, 3.5" SATA Hard Drive: new condition; mean time between failures (mtbf) 2000000 h; continuous operation Yes; rotational vibration (rv) sensors Yes; uncorrectable bit error rate (uber) < 1 per 10^15 bits read; average latency 4.16 ms; hdd interface transfer rate 6 Gbit/s. Manufacturer part number ST4000NM000B. For the full datasheet with electrical, environmental, and compliance details, contact our pre-sales engineering team.
