Cisco router RFGW-10-RFSW1 Cisco RF Gateway

Brand: Cisco | Category: Network Equipment

SKU: CSC-RFGW-10-RFSW1 | Part #: RFGW-10-RFSW1 | MPN: RFGW-10-RFSW1

Contact for Pricing — Request a Quote

In cable headend and master hub environments where video distribution, DOCSIS traffic, and VOD sessions run continuously, switch fabric failure means service interruption across multiple customer segments. The Cisco RFGW-10-RFSW1 RF Switch Fabric Card addresses this risk by enabling active-passive or active-active redundancy models within the Cisco RF Gateway 10 chassis, with sub-second failover times that keep streaming sessions, EQAM output, and downstream DOCSIS traffic flowing without perceptible interruption. For network engineers and headend operations teams responsible for carrier-grade availability, the RFGW-10-RFSW1 is not a convenience feature—it is the foundation of a resilient RF distribution architecture.

The RFGW-10-RFSW1 functions as a dedicated modular blade that occupies the switch fabric slot within the RFGW-10 chassis, handling the real-time routing and signal fabric switching that connects incoming RF sources, EQAM modules, SDV (Switched Digital Video) engines, and DOCSIS downstream interfaces. Cisco engineered this card to support the full spectrum of cable television services: linear video feeds, on-demand content streams, voice-over-IP signaling, and high-speed data downstream. The card runs Cisco IOS, ensuring compatibility with existing RF Gateway 10 management workflows and CLI-driven provisioning that headend operators already understand. Because the RFGW-10-RFSW1 is a genuine Cisco OEM component, it qualifies for Cisco SmartNet support contracts, giving your organization direct access to Cisco TAC resources and firmware updates aligned with your SLA requirements.

Redundancy architecture is where the Cisco RFGW-10-RFSW1 delivers measurable operational value. When deployed in active-passive mode, a second RF Switch Fabric Card stands ready to assume traffic within milliseconds if the primary card experiences a fault; VRRP (Virtual Router Redundancy Protocol) orchestrates the switchover without requiring manual intervention or static traffic rerouting. Active-active configurations allow both cards to share the switching load, distributing RF signal routing across the fabric and improving overall throughput capacity while maintaining full redundancy. This flexibility lets you right-size your redundancy investment based on traffic patterns, peak load forecasting, and your acceptable downtime window. The part number RFGW-10-RFSW1 appears on bill-of-materials documents and RMA requests across major cable operators in the GCC region and Southeast Asia, and its proven track record in high-traffic hub sites makes it a standard specification when building out new or upgraded headend facilities.

From a compliance perspective, the RFGW-10-RFSW1 adheres to DOCSIS, SCTE, and DVB-C standards, ensuring interoperability with cable network infrastructure that follows North American and European regulatory frameworks. If your organization is expanding into multi-region cable operations or consolidating headend capacity across geographies, standards compliance eliminates unexpected compatibility friction during integration testing. The card's form factor is fixed to the dedicated switch fabric slot within the RFGW-10 chassis; there is no ambiguity in installation, and no risk of incorrect module placement or configuration errors that could cascade into RF signal degradation. Network engineers responsible for infrastructure validation and change management will appreciate this deterministic design approach.

Headend architects and cable operations managers typically evaluate the RFGW-10-RFSW1 during the planning phase of RF Gateway 10 deployments or when retrofitting redundancy into existing single-card configurations. The decision criteria usually center on traffic growth projections, target availability percentages (often 99.9% or higher for carrier-grade networks), and cost-per-redundancy. Because the Cisco RF Gateway 10 series is modular, adding a second RFGW-10-RFSW1 card does not require chassis replacement, downtime, or re-engineering of optical interconnects—a property that makes redundancy upgrades a straightforward mid-cycle investment. For organizations operating multiple cable headends or hub sites, the part number RFGW-10-RFSW1 becomes a repeatable standard that simplifies inventory management, training, and spare-parts logistics.

Switch Fabric Specifications and Chassis Integration

• RF signal routing architecture supports EQAM, SDV, VoD, and DOCSIS downstream services within a single fabric
• Active-passive and active-active redundancy modes with sub-second failover and VRRP orchestration
• Cisco IOS software with CLI-based provisioning and existing RF Gateway 10 management integration
• Occupies dedicated switch fabric slot in RFGW-10 chassis; form factor eliminates installation ambiguity
• DOCSIS, SCTE, and DVB-C standards compliance for multi-region cable network deployments
• Cisco SmartNet eligible; genuine OEM component with direct Cisco TAC support access
• No chassis replacement required for redundancy retrofit; modular design enables mid-cycle upgrades

Omnixon Global stocks the Cisco RFGW-10-RFSW1 and maintains regional inventory across our Dubai and UAE hub, serving cable operators, data center operators, and enterprise network teams throughout the GCC, Southeast Asia, and Europe. Whether you are building a new cable headend, upgrading redundancy on an existing RF Gateway 10 platform, or seeking urgent replacement inventory for a failed switch fabric card, our technical team is available to validate compatibility, cross-reference part numbers, and coordinate delivery to your facility. Please submit an RFQ through our website or contact our sales engineering team directly; we will respond within 24 hours with availability, lead times, and configuration guidance specific to your deployment.