Cisco FPNM-2SR-10G-BP Cisco Firepower network module

Brand: Cisco | Category: Accessories & Components

SKU: CSC-FPNM-2SR-10G-BP | Part #: FPNM-2SR-10G-BP | MPN: FPNM-2SR-10G-BP

Contact for Pricing — Request a Quote

The Cisco FPNM-2SR-10G-BP is a dual-port 10 Gigabit network expansion module designed for Cisco Firepower appliances that require high-speed, short-range optical connectivity. This module slides into the dedicated network module slot of compatible Firepower chassis using a tool-less mechanism, which means installation requires no screwdrivers, no cable management racks, and minimal downtime. The hardware-based network bypass capability ensures that if the Firepower appliance loses power or fails, traffic continues to flow through the module itself rather than being dropped entirely—a critical feature for data centres where inline security inspection cannot afford to become a single point of failure.

Each of the two SFP+ ports on the FPNM-2SR-10G-BP operates at 10 Gigabit Ethernet speeds using the 10GBASE-SR optical standard, which is optimized for multimode fiber runs up to 300 metres. The module accepts industry-standard SFP+ transceivers with LC duplex connectors, meaning you are not locked into Cisco transceiver pricing if you need to source optics separately. Network engineers and infrastructure architects at enterprises running Cisco Firepower typically choose this module when they need to segment traffic across multiple isolated network paths—one port might handle north-south data centre traffic while another handles east-west inter-segment inspection, or the dual ports allow for active-active load balancing across separate fiber strands.

Because this is a genuine Cisco component bearing the manufacturer part number FPNM-2SR-10G-BP, it qualifies for Cisco TAC support and falls under Cisco's standard regulatory and compliance certifications. The module is IEEE 802.3ae compliant and integrates seamlessly with Firepower threat defense architecture. Installation is straightforward: power down is not always required for hot-swap capable platforms, you insert the module into the available slot until the retention clips engage, and then you connect your SFP+ transceivers and fiber. There is no firmware to update for the module itself, no configuration wizard to run—it is recognized immediately by the Firepower appliance and becomes available for traffic policy assignment.

Organizations deploying Firepower appliances in high-availability pairs or clustered configurations often purchase multiple FPNM-2SR-10G-BP modules to ensure redundant inspection paths and to separate management, inspection, and failover traffic onto dedicated physical links. System administrators responsible for firewall maintenance appreciate the tool-less design because it reduces the chance of static discharge damage during installation and keeps installation time to under five minutes per module. For data centres in the GCC region where Firepower is widely deployed for regulatory compliance (banking, government, healthcare sectors), the dual 10GbE ports and short-range optical focus make this module particularly valuable for campus networks and data centre core interconnects where MMF cabling is already in place.

Cisco designed the FPNM-2SR-10G-BP to match the thermal and power envelope of the Firepower chassis itself, so there is no risk of exceeding power budgets or triggering thermal throttling when you add this module. The form factor is compact—it occupies a single horizontal slot on most Firepower models—which means you can add network capacity without replacing the entire appliance. Maintenance is minimal: the SFP+ transceivers are user-replaceable hot-swap components, so if a transceiver fails, you swap it in seconds without touching the module or powering down the appliance.

Interface & Connectivity Specifications

• Dual SFP+ ports operating at 10 Gigabit Ethernet (10GbE) with 10GBASE-SR optical standard for multimode fiber
• Hardware-based network bypass ensures traffic continuity in the event of appliance failure or power loss
• LC duplex connectors via SFP+ transceiver slots; transceiver sourcing is not restricted to Cisco branded optics
• Supports multimode fiber (MMF) runs up to 300 metres, ideal for data centre and campus network deployments
• Tool-less hot-swap installation into Firepower appliance module slot; no power-down required on supported platforms
• IEEE 802.3ae standards compliant; Cisco TAC supported and covered under Cisco warranty and compliance certifications
• Zero configuration required; module is auto-recognized by Firepower threat defense operating system immediately upon insertion

Omnixon Global stocks the Cisco FPNM-2SR-10G-BP and other genuine Cisco Firepower network modules for immediate delivery across the UAE, GCC, and extended Asia-Pacific and European regions. If your organization is planning a Firepower deployment, expanding an existing Firepower cluster, or integrating Firepower into a new data centre build, we can assist with part availability, compatibility verification, and technical specification support. Contact us with your requirements or request a formal quotation.