Catalyst 1000 C1000-24P-4G-L 24-Port PoE+ Switch

Brand: Cisco | Category: Network Switches

SKU: CISCO-C1000-24P-4G-L-CATALYST-1000-24-POE | Part #: CISCO-C1000-24P-4G-L-CATALYST-1000-24-POE

Contact for Pricing — Request a Quote

Cisco's Catalyst 1000 C1000-24P-4G-L operates as a fixed-configuration access-layer switch that uses store-and-forward architecture with a 12.8 Gbps switching capacity and 9.5 Mpps forwarding rate. While this forwarding architecture introduces microsecond-level latency unsuitable for sub-microsecond spine-leaf or high-frequency trading requirements, the C1000-24P-4G-L C1000-24P-4G-L is purpose-built for branch offices, smaller data centres, and enterprise campus networks where deterministic, wire-speed switching at Layer 2 and Layer 3 matters more than ultra-low cut-through latency. The 16,000 MAC address table and support for 4094 VLANs enable network segmentation and broadcast domain isolation across modest-scale deployments, making this Cisco platform well-suited for organisations transitioning from unmanaged or legacy switches into managed, standards-compliant infrastructure.

The defining feature of the C1000-24P-4G-L is its integrated Power over Ethernet capabilities. Twenty-four 10/100 Mbps downlink ports each deliver up to 30 watts of PoE+ power from a shared 195-watt budget, permitting simultaneous powering of IP phones, wireless access points, PTZ cameras, and other low-power endpoints without separate power feeds. This eliminates cable clutter and simplifies deployment in environments where power outlets are scarce or aesthetically problematic. Network engineers responsible for campus refreshes, branch buildouts, or video surveillance infrastructure rollouts gravitate toward the CISCO-C1000-24P-4G-L because the per-port power delivery is substantial enough to run modern PoE+ endpoints while the overall power envelope remains modest—typical wall consumption sits between 80 and 120 watts depending on load. The four uplink ports (two 1 Gbps Ethernet, two SFP combo slots) provide flexible backbone connectivity without forcing a forklift upgrade to higher-port-density models.

Management of the Catalyst 1000 series reflects Cisco's pragmatic approach to enterprise switching. The C1000-24P-4G-L ships with web-based GUI access over HTTP or HTTPS, command-line interface via SSH and legacy Telnet, and full SNMP v1/v2c/v3 instrumentation. This trio of methods satisfies both graphical-interface operators and automation-focused teams who need to script configuration, monitor port statistics, and trigger alerts via SNMP traps. IEEE 802.1X port-based authentication controls which devices can attach to each port, aligning with zero-trust and device-posture requirements common in healthcare, finance, and regulated manufacturing sectors. Quality of Service reaches across four hardware queues per port with IEEE 802.1p CoS and DSCP classification, allowing priority queuing for voice and video traffic on mixed-use networks. The switch runs Cisco LAN Base feature set, avoiding the licensing overhead of more ambitious models while retaining Rapid Spanning Tree (RSTP) and Multiple Spanning Tree (MSTP) support for redundant topologies.

From a physical standpoint, the C1000-24P-4G-L occupies a single rack unit and can also sit on a desktop or shelf, delivering flexibility in space-constrained branch or edge environments. Its 100–240 volt AC internal power supply operates across global voltage standards without external converters, and an operating temperature range of 0 to 45 degrees Celsius accommodates typical data centre and office conditions while falling short of harsh industrial or outdoor exposure. Jumbo frame support to 9000 bytes enables lossless transport of larger packets for NFS, iSCSI, and video workflows without fragmentation. This Cisco switch is not intended for hyper-scale cloud fabric roles or AI cluster interconnect scenarios where programmable silicon, white-box design, and ultra-low latency become mandatory; rather, it occupies the midpoint between consumer-grade managed switches and enterprise spine-leaf systems, serving organisations with hundreds rather than tens of thousands of network endpoints.

Omnixon Global stocks the C1000-24P-4G-L across our Dubai logistics centre and maintains relationships with Cisco's regional distribution channels, ensuring both new and warranty-return inventory. We serve network architects, systems integrators, and procurement teams across the GCC, Asia-Pacific, and European markets with technical pre-sales support, compatibility verification, and flexible ordering to match your capex and deployment schedules. If you are evaluating the Catalyst 1000 for campus refresh, branch expansion, or PoE-heavy endpoint environments, please submit an RFQ through our website or contact our technical sales team directly.

Interface & Connectivity Options

• 24 × 10/100 Mbps PoE+ downlink ports with up to 30 watts per port and 195-watt shared power budget
• 4 × Gigabit uplink ports: 2 × RJ-45 Ethernet and 2 × SFP combo slots for fibre or copper backbone links
• IEEE 802.3af (PoE) and IEEE 802.3at (PoE+) compliance for mixed legacy and modern endpoint powering
• Jumbo frame support to 9000 bytes and 4094 VLAN support for multi-tenant and segmented networks
• Web GUI, SSH/Telnet CLI, and SNMP v1/v2c/v3 management across HTTP/HTTPS secure channels
• 1U rack-mount or desktop form factor with 100–240V AC internal power supply and 0–45°C operating range
• Store-and-forward switching architecture delivering 12.8 Gbps throughput and 9.5 Mpps forwarding rate with 16,000 MAC entry table