Brand: Cisco | Category: Wireless Access Points
SKU: CSC-AIR-SAP2602E-E-K9 | Part #: AIR-SAP2602E-E-K9 | MPN: AIR-SAP2602E-E-K9
Contact for Pricing — Request a Quote
The Cisco AIR-SAP2602E-E-K9 access point operates over a single 1 Gbps Ethernet uplink via 802.3at PoE+ (Power over Ethernet), establishing wired backhaul as the primary design constraint for deployment planning. This indoor ceiling/wall-mount wireless access point from Cisco delivers concurrent dual-band operation across 2.4 GHz and 5 GHz frequencies, supporting IEEE 802.11a, 802.11b, 802.11g, and 802.11n standards. The AIR-SAP2602E-E-K9 features two independent radios with 3x3 MIMO and 3 spatial streams per radio, enabling a maximum data rate of 450 Mbps per radio. Six external RP-TNC antenna connectors allow flexibility in antenna selection and positioning, while support for up to 16 SSIDs (8 per radio) accommodates segmented network policies and guest access scenarios.
Enterprise network engineers and IT procurement teams deploying campus or office environments specify this Cisco access point for its controller-based lightweight architecture using CAPWAP, requiring integration with a Cisco Wireless LAN Controller for centralized management and policy enforcement. Security capabilities include WPA2-Enterprise and WPA2-Personal modes, AES-CCMP encryption, 802.1X authentication, and TKIP support, meeting compliance requirements across regulated industries. Built-in Cisco CleanAir spectrum intelligence detects and avoids interference sources, while ClientLink 2.0 transmit beamforming optimizes performance for legacy wireless clients. Quality of Service features—WMM, DSCP marking, and 802.11e—prioritize voice and video traffic in bandwidth-constrained networks.
The AIR-SAP2602E-E-K9 is engineered for ETSI regulatory domains (Europe designation). Organizations requiring high-density wireless coverage with enterprise-grade management and security controls will find this access point suitable for mixed-use deployments. Contact Omnixon Global to request a quotation for the Cisco Aironet 2600 series and discuss volume pricing, lead times, and integration support for your wireless infrastructure expansion.
```| Brand | Cisco |
| Category | Wireless Access Points |
| SKU | CSC-AIR-SAP2602E-E-K9 |
| Part Number | AIR-SAP2602E-E-K9 |
| Condition | New |
| Interface | Wi-Fi 6E |
| Manufacturer Part Number | AIR-SAP2602E-E-K9 |
| Series | Cisco Aironet 2600 |
| Form Factor | Indoor ceiling/wall-mount access point |
| Wireless Standards | IEEE 802.11a, 802.11b, 802.11g, 802.11n |
| Frequency Bands | 2.4 GHz and 5 GHz (concurrent dual-band) |
| Number of Radios | 2 (one per band, simultaneous operation) |
| MIMO Configuration | 3x3 MIMO with 3 spatial streams (3SS) per radio |
| Maximum Data Rate (per radio) | 450 Mbps |
| Antenna Interface | External antenna connectors (RP-TNC); antennas sold separately |
| Antenna Connectors | 6 x RP-TNC external antenna ports |
| Supported SSIDs | Up to 16 SSIDs (8 per radio) |
| Power Input | 802.3at PoE+ (Power over Ethernet); Cisco AIR-PWRINJ5 injector alternatively supported |
| LAN Interface | 1 x 10/100/1000BASE-T Ethernet (RJ-45) |
| Management Architecture | CAPWAP (Controller-based/Lightweight); requires Cisco Wireless LAN Controller |
| Security Standards | WPA2-Enterprise, WPA2-Personal, AES-CCMP encryption, 802.1X, TKIP |
| Quality of Service | WMM (Wi-Fi Multimedia), DSCP marking, 802.11e |
| Cisco CleanAir | Yes — spectrum intelligence for interference detection and avoidance |
| ClientLink | ClientLink 2.0 (transmit beamforming for legacy client improvement) |
| Regulatory Domain | E (ETSI — Europe) |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Storage Temperature | -30°C to 70°C (-22°F to 158°F) |
The Cisco Cisco wireless AP AIR-SAP2602E-E-K9 Cisco Aironet wireless access point is enterprise networking hardware for data-center, campus, and branch deployments. Common roles include core/distribution switching, server uplinks, top-of-rack fabric, and edge connectivity in mixed Cisco/Juniper/Arista environments.
The Cisco Cisco wireless AP AIR-SAP2602E-E-K9 Cisco Aironet wireless access point interoperates with standard switching protocols (LACP, MLAG/VPC, 802.1Q, OSPF/BGP). For specific cross-vendor scenarios — Cisco-to-Arista MLAG peering, fabric integration with Cumulus/SONiC, or migration from legacy Catalyst — our network engineers map a compatibility plan as part of the RFQ.