Micron 5400 PRO 1.92TB SATA 2.5" Enterprise SSD
Brand: Micron | Category: Enterprise SSDs
SKU: MIC-MTFDDAK1T9TGA-1BC1ZABYYR | Part #: MTFDDAK1T9TGA-1BC1ZABYYR | MPN: MTFDDAK1T9TGA-1BC1ZABYYR
Contact for Pricing — Request a Quote
About the Micron 5400 PRO 1.92TB SATA 2.5" Enterprise SSD
The Micron 5400 PRO 1.92TB SATA 2.5" Enterprise SSD from Micron is enterprise-grade Enterprise SSDs hardware built for data centers. It features 1.92 TB capacity, 2.5-inch (7 mm) form factor, SATA 6 Gb/s interface. The Micron 5400 PRO is a read-intensive enterprise SATA SSD built on Micron's 176-layer 3D TLC NAND, delivering consistent, high-throughput performance in the 2.5-inch SATA 6 Gb/s form factor. The 1.92TB capacity point (part number MTFDDAK1T9TGA-1BC1ZABYYR) targets organizations refreshing legacy 12 Gb/s SAS and SATA hard-disk-drive arrays where the existing backplane and cabling infrastructure is retained, eliminating the need for controller card changes while dramatically i Available in brand new condition. Micron enterprise ssds products are trusted by enterprises and data centers worldwide. Available from Omnixon Global. Contact our sales team to request a quote.
Technical Specifications
| Brand | Micron |
| Category | Enterprise SSDs |
| SKU | MIC-MTFDDAK1T9TGA-1BC1ZABYYR |
| Part Number | MTFDDAK1T9TGA-1BC1ZABYYR |
| Condition | New |
| Capacity | 1.92 TB |
| Form Factor | 2.5-inch (7 mm) |
| Interface | SATA 6 Gb/s |
| Manufacturer Part Number | MTFDDAK1T9TGA-1BC1ZABYYR |
| Product Line | 5400 PRO |
| Form Factor | 2.5-inch (U.2 7mm) |
| Interface | SATA 6 Gb/s |
| Capacity | 1.92 TB |
| NAND Technology | Micron 176-Layer 3D TLC NAND |
| Sequential Read (max) | 540 MB/s |
| Sequential Write (max) | 520 MB/s |
| Random Read IOPS (max) | 95,000 IOPS |
| Random Write IOPS (max) | 20,000 IOPS |
| Endurance (DWPD) | 1.5 DWPD (5-year) |
| Total Bytes Written (TBW) | 5,256 TBW |
| Power — Active Read | 3.8 W |
| Power — Active Write | 4.2 W |
| Power — DevSleep | 5 mW |
| Encryption | AES 256-bit SED; TCG Opal 2.0; TCG Enterprise |
| Data Integrity | End-to-end data path protection; Power-Loss Imminent (PLI) circuitry |
| MTBF | 3,000,000 hours |
| Operating Temperature | 0°C to 70°C |
| Dimensions | 100.45 mm x 69.85 mm x 7.0 mm |
| Weight | Approximately 72 g |
Frequently Asked Questions about Micron 5400 PRO 1.92TB SATA 2.5" Enterprise SSD
What does the Micron 5400 PRO 1.92TB SATA 2.5" Enterprise SSD do?
At 1.92 TB, the Micron 5400 PRO 1.92TB SATA 2.5" Enterprise SSD suits enterprise data-center storage tiers — all-flash arrays, hyperconverged storage pools (vSAN, Ceph), database backends, and high-throughput backup repositories. The SATA 6 Gb/s interface is supported by major server platforms.
What are the headline specs of the Micron 5400 PRO 1.92TB SATA 2.5" Enterprise SSD?
Key specifications for the Micron 5400 PRO 1.92TB SATA 2.5" Enterprise SSD: capacity 1.92 TB; form factor 2.5-inch (7 mm); interface SATA 6 Gb/s; 5-year limited (Micron) support; new condition. Manufacturer part number MTFDDAK1T9TGA-1BC1ZABYYR. For the full datasheet with electrical, environmental, and compliance details, contact our pre-sales engineering team.
Is the Micron 5400 PRO 1.92TB SATA 2.5" Enterprise SSD compatible with my infrastructure?
The Micron 5400 PRO 1.92TB SATA 2.5" Enterprise SSD uses a SATA 6 Gb/s interface in a 2.5-inch (7 mm) form factor. It's compatible with server platforms that expose this interface — typical deployments include Dell PowerEdge, HPE ProLiant, Lenovo ThinkSystem, and Supermicro SuperServer chassis. For specific vendor part-number compatibility, our team validates against the manufacturer support matrix.